Gavita 20 ft 3 Pin Power Cord 277-480V for Long Ceiling Runs
Same fixture-side connector as the 8 ft variant — the Gavita 3-pin LED inlet for CT 2000e, RS 2400e, and second-gen 1700e/CT 1930e. This cord is 20 ft (6.1 m) long. That extra length matters once a ceiling-mounted fixture sits more than a couple meters from the nearest commercial outlet. The breaker end is open lead. An electrician terminates to a 277V or 480V locking outlet, sized to the run.
Voltage Drop and Long-Run Wiring Considerations
On a 20 ft run, voltage drop is usually a non-issue at 277V or higher. The math works out under the 3% NEC threshold for any reasonable fixture load. Where the longer cord pays off is in panel layout flexibility. A single 30A 480V circuit can drop down a 20 ft cord to feed a fixture in a corner of the room. Growers typically hang the panel where it makes sense and let the cord reach the fixture. Keep the breaker side terminated by a licensed electrician.
Key Features
- Length: 20 ft (6.1 m), built for fixtures in corners or aisles past the reach of an 8 ft cord
- Voltage range: 277-480V — covers commercial 277V single-phase and 480V three-phase wiring
- Fixture connector: Gavita 3-pin LED inlet, paired to the newer CT 2000e and RS 2400e generation
- Breaker end: Open/bare lead so an electrician matches the room's locking outlet or junction box
- Layout flexibility: Lets the panel stay put while the cord reaches the fixture, not the other way around
Technical Specifications
| Specification | Value |
|---|---|
| Length | 20 ft (6.1 m) |
| Voltage Range | 277-480V |
| Fixture Connector | Gavita 3-pin LED inlet |
| Breaker End | Open/bare lead |
| Compatibility | Gavita CT 2000e, RS 2400e, second-gen 1700e/CT 1930e (3-pin generation) |