Gavita 8 ft Power Cord 208-240V for Single-Phase Rooms
Replacement 8 ft (2.4 m) power cord for Gavita's legacy 5-pin Wieland LED fixtures. The original RS 1900e, 1700e, 900e, and CT 1930e generation pairs with this cord on standard 208-240V single-phase circuits. The Wieland RST 16i5 connector mates to the fixture. The breaker end is open lead so an electrician can terminate to NEMA, locking outlet, or hard-wired junction.
Compatibility Notes for Gavita LED Power Cord Builds
Standardize a room on 208V or 240V single-phase, and this is the right cord variant. One key compatibility detail. It does not work with the newer 3-pin Gavita LEDs (CT 2000e, 1700e Gen2 onward). Growers typically run one cord per fixture rather than splicing for daisy chains. The 5-pin LED ecosystem doesn't support pass-through power between fixtures the way the newer 3-pin generation does.
Key Features
- Cord length: 8 ft (2.4 m) gives enough slack to drop from a hung fixture to a wall outlet or ceiling-run conduit without coiling
- Voltage range: 208-240V single-phase, the most common circuit type in residential and small commercial rooms
- Fixture-side connector: Wieland RST 16i5 5-pin — the legacy Gavita LED inlet, not interchangeable with the newer 3-pin
- Breaker-side end: Open/bare lead so an electrician can terminate to NEMA 6-15P, L6-15P, or a junction box per local code
- Replacement-grade build: Same construction Gavita ships with the original fixture, so it sits in the room without thermal or load surprises
Technical Specifications
| Specification | Value |
|---|---|
| Length | 8 ft (2.4 m) |
| Voltage Range | 208-240V |
| Fixture Connector | Wieland RST 16i5 5-Pin |
| Breaker End | Open/Bare Lead |
| Compatibility | Gavita Pro RS 1900e, 1700e, 900e, CT 1930e (5-pin generation) |