Gavita 8 ft 277-400V Power Cord for the 1900e LED
Rooms wired for 277V commercial circuits or 400V three-phase distribution need this 8 ft (2.4 m) cord. It drops a Gavita Pro 1900e or compatible legacy 5-pin LED into the panel. The Wieland RST 16i5 5-pin connector mates to the fixture. The breaker end is bare lead. A licensed electrician terminates it to whatever locking plug, twist-lock, or junction the facility was built with.
Why a Dedicated 277-400V Cord Matters in Commercial Rooms
Higher voltage means lower current per fixture and less voltage drop across long runs. Tighter breaker counts on the panel too. Practical wins once you're past two or three fixtures per circuit. Growers typically pair the 1900e's 277-400V input window with a properly rated cord. That avoids the heat-soak that comes from pushing 240V wiring into a 400V environment. Short on the install. Right on the rating.
Key Features
- Cord length: 8 ft (2.4 m), enough slack from a ceiling-mounted fixture to a wall outlet or junction
- Voltage range: 277-400V — fits North American commercial 277V single-phase and European/commercial 400V three-phase
- Fixture connector: Wieland RST 16i5 5-pin, the legacy Gavita LED inlet for 1900e and similar
- Breaker end: Open/bare lead for electrician termination to L7-15P, L8-15P, or a hard-wired junction
- Application fit: Built around the Gavita Pro 1900e but works with the 5-pin generation of CT 1930e and similar fixtures
Technical Specifications
| Specification | Value |
|---|---|
| Length | 8 ft (2.4 m) |
| Voltage Range | 277-400V |
| Fixture Connector | Wieland RST 16i5 5-Pin |
| Breaker End | Open/Bare Lead |
| Primary Compatibility | Gavita Pro 1900e LED (5-pin generation) |