Skip to product information
1 of 1
Brand: *AAA NO Brand

Sure To Grow 6 x 6 x 4 inch Grow Block, PET Hydroponic Media with Cube Cut-Out

Sure To Grow 6 x 6 x 4 inch Grow Block, PET Hydroponic Media with Cube Cut-Out

SKU: SKU:STGB6

Ordering a large quantity of this item?
As long as the order total is more than $2K you can:

Regular price $103.02 USD
Regular price Sale price $103.02 USD
Sale Sold out
Shipping calculated at checkout.

The Sure To Grow grow block is a 6 x 6 x 4 inch PET fiber media for tomatoes, cucumbers and other long-term crops. A 1-1/2 inch cut-out holds an STG Grow Cube, and a plastic sleeve blocks algae and slows evaporation. It goes in dry, with no presoaking.

View full details

Sure To Grow Grow Block for Long-Term Crops

Sure To Grow media is made from PET fiber rather than stone wool or coco. The material is pH neutral, sterile and inert, so it does not shift the nutrient solution you feed. It arrives ready to plant, with no presoaking or conditioning step. This block measures 6 inches long, 6 inches wide and 4 inches deep. That larger volume suits long-term crops such as tomatoes and cucumbers that need room for roots. A rectangular cut-out on top measures 1-1/2 inches across. It accepts an STG Grow Cube, so seedlings or cuttings started in cubes move up without root disturbance. Plants can also be started directly in the block. A plastic sleeve wraps the sides to block algae, limit heat build-up and reduce evaporation. Sweet peppers, flowers, larger herbs and ornamentals are also listed crops. The block pairs with STG Grow Slabs and STG Flood and Drain Mats in a larger setup.

Planting and Watering PET Fiber Media

Because the media does not wick like a sponge, water passes through and settles near the bottom where roots feed. That keeps the top surface drier, which gives algae and fungus gnats less to work with. Set the cube into the cut-out once roots begin to show at its sides. Press it down gently so the cube sits flush with the top. Place the block on a slab, mat or tray depending on the system you run. It fits drip, ebb and flow, float, NFT, wick and aeroponic systems. On drip, position the emitter near the stem so water reaches the cube first. Water in smaller, frequent doses early on, then extend the interval as roots fill the media. Watch runoff to confirm the solution drains freely and does not pool. Leave the plastic sleeve on through the whole crop for light and moisture control. Roots that reach the bottom can grow down into a slab or mat placed below. At the end of the cycle, pull the plant and roots and discard the spent media.

Key Features

  • PET Fiber Media: pH neutral, sterile and inert.
  • 6 x 6 x 4 in Size: Root volume for long-term crops.
  • 1-1/2 in Cut-Out: Holds an STG Grow Cube.
  • Plastic Sleeve: Blocks algae, heat build-up and evaporation.
  • Wide System Fit: Drip, ebb and flow, float, NFT, wick and aeroponic.
Sure To Grow white PET blocks with cube cut-outs

Technical Specifications

Specification Value
Brand Sure To Grow (STG)
Material PET fiber
Dimensions 6 x 6 x 4 in (L x W x D)
Cut-Out 1-1/2 in rectangular
Sleeve Plastic, on the sides
Properties pH neutral, sterile, inert
Preparation No presoak needed
Systems Drip, ebb and flow, float, NFT, wick, aeroponic
Listed Crops Cucumbers, tomatoes, sweet peppers, flowers, larger herbs, ornamentals
Compatible With STG Grow Cubes, STG Grow Slabs, STG Flood and Drain Mats
Item Number STGB6