AC Infinity 2x2 Grow Tent Mounting Bars - 4 Steel Bars, 21.81 in, with Support Clamps

AC Infinity 2x2 Mounting Bars for Small Tents

This kit adds four steel crossbars to the frame of a 2 x 2 ft grow tent. Each gray bar runs 21.81 in, sized to span between the corner poles of a tent that size. The bars give clip-on fans, trellis netting and drying racks somewhere solid to attach. Supplemental lights can also mount to them magnetically for side lighting inside the canopy. Hook-and-loop straps fix each bar to the poles, and adhesive silicone pads keep it from sliding. Because the straps release and refasten, a bar can move up or down the frame as plants grow. Each bar is rated for up to 2 lb on its own on an AC Infinity CLOUDLAB tent. A support clamp under the bar doubles that rating to 4 lb. The kit includes eight clamps in two sizes, for poles of at least 16 mm or at least 22 mm. Eight straps, eight thin pads, eight thick pads and eight machine screws with nuts round out the box. The bars are made of thick, resilient steel. AC Infinity backs them with a two-year warranty.

Installing Grow Tent Support Bars on a 2x2 Frame

Take the tent walls off the frame before fitting the bars, which gives room to work. Stick a silicone pad to both ends of each bar, using the same pad size on each side. The thin and thick pads let the bar fit snugly whatever the gap to the pole. Thread a strap through the slot at the bar end, buckle side out and padded side in. Wrap the strap around the pole, feed it back through the buckle and pull it tight. One strap can pass through two bar openings where two bars meet at a pole. Pick the clamp that matches the pole size, open it around the bar and tighten the screw and nut. Turn each clamp so its flat side runs parallel to the tent wall. A pair of bars at mid-height makes a frame for a trellis net over a single plant. A bar near the top holds a small clip fan aimed across the canopy. Never use these bars in place of the tent's roof bars. They are not made to carry an LED grow light or a heavy fan and filter. The illustrated manual is attached for the full installation sequence.

Key Features

• Four Steel Bars: 21.81 in bars sized for a 2 x 2 ft tent frame.
• Up to 4 lb per Bar: 2 lb alone, 4 lb with a support clamp, on a CLOUDLAB tent.
• Two Clamp Sizes: Four clamps for poles of 16 mm or more, four for 22 mm or more.
• Adjustable Height: Hook-and-loop straps release and refasten anywhere on the pole.
• Grip Pads: Thin and thick adhesive silicone pads stop sliding.
• Multi-Use: Clip fans, trellis nets, drying racks and magnetic side lights.

Technical Specifications