![[DLW-GMC] GROW1 orange 2 in neoprene inserts, 100 piece pack](http://growershouse.com/cdn/shop/files/dlw-gmc-171200-1794948783058-0-webp.webp?v=1794954634&width=1445)
Orange Neoprene Inserts for Net Cups and Cloners
Leafy greens, herbs and fresh cuttings all need a soft collar to sit in a net cup without media. These GROW1 discs fill that role at 2 in across and 0.5 in thick. Each one has a slit from the edge to the center, so a stem slides in sideways. The soft neoprene closes around it and holds it at the height you set. That grip keeps a young plant from tipping as the channel water moves past the roots. In a cloner, the same hold keeps the cut end steady inside the mist. Bright orange stands out on a dark lid, which makes empty sites easy to spot during a busy planting day. It also works as one color in a wider coding scheme for varieties or planting dates. The pack holds 100 inserts and weighs about 0.5 lb. That covers several cloner runs or a full set of channel sites.
Running Inserts in an NFT System or DWC Lid
In a channel setup, each net cup sits in a hole and the film of water runs underneath. Slide the seedling or cutting into the insert first, with the root zone below the disc. Drop the insert into a 2 inch net cup and press until it sits snug against the walls. Set the cup in the channel and check that the root tips touch the moving water. For a DWC lid, keep the stem base just above the water line and let the roots grow down. Leafy crops grow out of the top while the collar keeps the crown steady. At harvest, pull the whole cup, cut the plant and slide the insert off the stem. The foam slips free without shredding, so it can go straight into the wash bin. Clean the inserts, soak them in a diluted sanitizer, then rinse thoroughly. Let them dry completely before the next planting goes in.
Key Features
- 2 in Diameter: Sized to sit inside 2 inch net cups.
- 0.5 in Thick: Holds a seedling or cutting upright without media.
- Center Slit: Stems slide in from the side and the foam closes around them.
- Soft Neoprene: Grips without crushing tender stems.
- Orange Color: Easy to see on dark lids and usable in color coding.
- 100-Piece Pack: Enough for several cloner runs or a full set of channel sites.
Technical Specifications
| Specification | Value |
|---|---|
| Brand | GROW1 |
| Product | Neoprene insert, cloning collar |
| Color | Orange |
| Diameter | 2 in |
| Thickness | 0.5 in |
| Material | Neoprene |
| Design | Slit from edge to center |
| Pieces per Pack | 100 |
| Pack Weight | 0.5 lb |
| Package Dimensions | 12 x 8 x 2 in |
| Uses | Cloning machines, aeroponics, net cups, NFT and DWC systems |
| SKU | 171200 |
| UPC | 816731013543 |