
Growonix EX1000 Reverse Osmosis System for 1000 GPD
The Growonix EX1000-HF runs a single DOW GXM-1000-HF TFC membrane to produce 1000 GPD at 42 GPH and a 1:1 ratio. The membrane holds a 98.5% nominal rejection, with a 96% minimum. It is wrapped in the EX Series patented bracketing on an electrogalvanized, powder-coated steel frame. A pair of liquid-filled stainless steel gauges read input and output pressure. When the two gauges drift apart, it is time to change the pre-filters. A manual flush valve purges salts off the membrane to extend its life.
Upgraded KDF85 Carbon and Booster-Ready Flow
This unit ships with the upgraded KDF85 catalytic carbon filter. On city water it cuts chlorine and chloramine. On well water it pulls down iron, hydrogen sulfide, and heavy metals that wreck membranes, and its bacteriostatic media stops microbes from breeding inside. Need more output? A BP-1000 booster pump doubles production to as much as 2000 GPD. A washable, reusable pleated sediment filter handles the dirt up front. Higher TDS or colder water will lower production.
Key Features
- 1000 GPD output: Single DOW GXM-1000-HF TFC membrane flows 42 gallons per hour at a 1:1 ratio.
- 98.5% nominal rejection: 96% minimum rejection for low-ppm output.
- Upgraded KDF85 carbon: Reduces chlorine, chloramine, iron, hydrogen sulfide, and heavy metals.
- Bacteriostatic media: Stops microbes from breeding inside the carbon stage.
- Booster-ready: A BP-1000 booster pump doubles production to as much as 2000 GPD.
- Washable sediment filter: High-flow pleated element rinses clean and reinstalls.
- Dual pressure gauges: Input and output gauges flag when to change the pre-filters.
- Electrogalvanized steel frame: Powder-coated for corrosion resistance and component protection.
- Manual flush valve: Purges salts off the membrane to extend its life.
Technical Specifications
| Specification | Value |
|---|---|
| Brand | Growonix |
| SKU | EX1000-HF-KDF |
| Production | 1000 GPD |
| Max with booster | 2000 GPD (1800 avg) |
| Flow rate | ~42 gallons per hour |
| Ratio | 1:1 (pure:waste) |
| Rejection | 98.5% nominal (96% minimum) |
| Membrane | One DOW GXM-1000-HF TFC high flow |
| Carbon | Upgraded KDF85 catalytic carbon |
| Sediment | High-flow pleated, washable/reusable |
| Frame | Electrogalvanized powder-coated steel; EX Series bracketing |
| Minimum feed pressure | 40 PSI |
| Recommended feed pressure | 60–80 PSI |
| Recovery | 50% (1:1 system ratio) |
| Operating temperature | 40–105°F |
| Operating pH | 3–11 |
| Maximum TDS | 2000 ppm |
| Maximum hardness | 15 gpg |
| Weight | 28 lbs |