Growonix GX Series 200 GPD Reverse Osmosis System, GrowonIX High Flow Membrane, 2:1 ratio, SS gauge

GrowoniX GX200 200 GPD High Flow RO System with 2:1 Ratio

The GX200 produces 200 GPD (8 gallons per hour) of purified water through a single GrowoniX high flow membrane at 97% rejection, and it does it on a 2:1 waste-to-pure ratio that puts out about 50% more water than a standard RO system at the same waste. It runs on as little as 20 psi of feed pressure, half what most RO membranes need, so it works off house pressure without a booster pump in many setups.

KDF85/CAT Carbon and Washable Sediment Filtration

This KDF build swaps in the Premium KDF85/CAT carbon filter, which is the cartridge to run when your tap water carries chloramine, and it also helps with iron, hydrogen sulfide, heavy metals, and bacteria. Ahead of it sits a washable, reusable high flow pleated sediment filter, so the first stage rinses clean instead of getting tossed each cycle. A 2.5 in stainless steel liquid-filled pressure gauge mounts into the patented GX Series bracket, a manual flush valve lets you clear the membrane to extend its life, and an auto shut-off valve stops production when your reservoir is full. Mount it on the wall, plumb your feed, and it's ready to fill.

Key Features

• 200 GPD / 8 GPH: High flow output of near-zero-PPM RO water for grow rooms and drinking water.
• 2:1 Waste Ratio: Roughly 50% more pure water per gallon wasted than a standard RO system.
• Low 20 PSI Operation: Runs on house pressure where standard membranes need 40 psi.
• KDF85/CAT Carbon: Removes chloramine plus iron, hydrogen sulfide, heavy metals, and bacteria.
• Washable Pleated Sediment Filter: Rinse and reuse the first stage instead of replacing it each cycle.
• 2.5 in Stainless Pressure Gauge: Liquid-filled gauge in the patented GX Series bracketing system.
• Manual Flush & Auto Shut-Off: Flush valve extends membrane life; shut-off stops production at a full reservoir.

Technical Specifications