GrowoniX High Flow RO Water Filtration System GX200 HF

Growonix GX200 Reverse Osmosis System for 200 GPD

The Growonix GX200-HF runs a single GXM-200-HF high flow membrane to produce 200 GPD at 6.25 GPH and a 2:1 ratio. The membrane holds a consistent 97% rejection to keep your ppm low. It is wall-mountable, wrapped in the GX Series patented bracketing on an electrogalvanized, powder-coated steel frame. A 2" liquid-filled stainless steel gauge reads input pressure. Clear pre-filter housings let you watch the filters load. Most growers swap them once they turn coconut brown.

Half the Water Waste in a Compact Footprint

The 2:1 ratio uses about half the water of traditional RO systems. A manual flush valve purges salts off the membrane to add real life to it. The auto shutoff valve closes the system when you run a float valve or faucet. It ships with a green coconut carbon cartridge rated for 8,000 gallons of chlorine reduction. A KDF85 upgrade is available for chloramine and well water. A washable, reusable pleated sediment filter handles the dirt. It runs on as little as 20 PSI of feed pressure.

Key Features

• 200 GPD output: Single GXM-200-HF high flow membrane flows 6.25 gallons per hour at a 2:1 ratio.
• 97% rejection: Consistent rejection keeps your feed-water ppm down.
• Half the water waste: The 2:1 ratio uses about 50% less water than traditional RO systems.
• Wall-mountable: Compact frame integrates into the GX Series patented bracketing.
• Green coconut carbon: Rated for 8,000 gallons of chlorine reduction; KDF85 upgrade available.
• Washable sediment filter: High-flow pleated element rinses clean and reinstalls.
• Liquid-filled gauge: 2" stainless steel pressure gauge for accurate input monitoring.
• Manual flush valve: Purges salts off the membrane to extend its life.
• Auto shutoff valve: Positive shutoff when used with a float valve or faucet.
• Clear pre-filter housings: See when filters load; runs on as little as 20 PSI feed.

Technical Specifications