Hanna Quick Calibration Solution HI9828-25 | 500 mL for HI9828/HI9829

Hanna Quick Calibration Solution for Multiparameter Probes

HI9828-25 is the quick calibration solution Hanna makes for the probes on its HI9828 and HI9829 multiparameter meters. One solution standardizes both the pH and the conductivity sensors in a single step. That replaces separate buffers and EC standards for routine field checks. The bottle holds 500 mL, about 16.9 fl oz. It is leak-proof and sized to ride inside the meter's thermoformed carry case. That matters when the meter travels between a well head, a mixing tank and a pond in one round. Quick calibration sets a single point for each sensor. It suits daily verification better than a full multi-point routine. Many operators run it at the start of each sampling day to confirm drift is under control. For the tightest pH work, a full two-point buffer calibration still has its place.

Fitting HI9828-25 Into Irrigation and Source Water Testing

Multiparameter probes earn their keep in larger operations that log source water, irrigation tanks and runoff. Each of those readings depends on sensors that have not drifted since the last check. Rinse the probe in clean water first, then shake off the excess so it does not dilute the solution. Pour enough to cover the pH and conductivity sensors completely. Let the readings settle before confirming the calibration on the meter. Discard the used portion afterward, because pouring it back contaminates the rest of the bottle. Keep the cap tight and store the bottle away from heat and direct sun. Pocket testers and benchtop meters calibrate with their own pH buffers and EC standards instead. Log the calibration date with each data set so readings can be traced later. Used carefully, one bottle covers many field days.

Key Features

• Two sensors, one solution: Calibrates the pH and conductivity sensors together, which cuts a field check down to a single pour.
• Single-point routine: A quick one-point calibration fits daily verification without the time of a full buffer series.
• Leak-proof travel bottle: The sealed bottle rides in the meter case without spilling on the way to the next sampling site.
• Matched to HI9828 and HI9829: Made for the sensors on Hanna's multiparameter probes, so the meter's quick-cal routine reads it correctly.
• 500 mL supply: A full bottle covers repeated field calibrations across a season of water testing.

Technical Specifications