Clonex Clone Solution Quart: A Starter Feed Sized for a Home Bench
Most home growers take cuttings a few times a season, and a quart covers that pace without going stale on the shelf. Clonex Clone Solution is a clone and seedling nutrient made in the USA by HydroDynamics International. Its guaranteed analysis reads 1-0.6-1, with nitrogen supplied as nitrate and ammoniacal forms. Calcium sits at 1% alongside magnesium and sulfur. Iron, manganese, zinc and copper are chelated, with boron, cobalt and molybdenum in trace amounts. The formula also carries 0.01% vitamin B1. The mix rate is 20 ml per gallon, or 5 ml per quart of water. At that rate one 946 ml bottle makes about 47 gallons of feed. The dose can rise toward 10 ml per liter as roots appear. Bring the finished mix to pH 5.5 to 6.5 before it goes on.
Clonex Solution for Seedlings, Plugs and Small Cloners
Seedlings in plugs take it as their first feed once the cotyledons open. Soak rockwool or soilless cubes in the solution, then let them drain fully. In a small aeroponic cloner, the solution replaces plain water in the reservoir. Change that reservoir on schedule instead of topping it up, so the feed stays fresh. A cutting has no roots yet, so it needs far less than a rooted plant. Overfeeding is the usual reason a tray of clones sits without rooting. A teaspoon measure per quart of water keeps small batches accurate. Shake the bottle before each use, since the minerals settle. Store it capped in a cool, dark spot between runs. Feeding stays at the low end until white root tips show through the media.
Key Features
- 1-0.6-1 starter feed: Gentle nitrogen, phosphate and potash for rootless cuttings and new seedlings.
- 1% calcium: Supports new roots and cell walls from the first watering.
- Chelated micronutrients: Iron, zinc, manganese and copper stay available in a weak mix.
- Vitamin B1 included: Thiamine at 0.01% is part of the formula.
- Easy small batches: 5 ml per quart of water, one teaspoon, keeps home batches simple.
- Cloner and plug ready: Works in aeroponic cloners, rockwool, soilless plugs and soil.
Technical Specifications
| Specification | Value |
|---|---|
| Brand | Clonex by HydroDynamics International |
| Type | Clone and seedling nutrient |
| N-P-K | 1-0.6-1 |
| Total nitrogen (N) | 1% (0.20% ammoniacal, 0.80% nitrate) |
| Available phosphate (P2O5) | 0.6% |
| Soluble potash (K2O) | 1% |
| Calcium (Ca) | 1% |
| Magnesium (Mg) | 0.20% |
| Sulfur (S) | 0.12% |
| Iron (Fe) | 0.03% chelated |
| Manganese (Mn) | 0.005% chelated |
| Zinc (Zn) | 0.003% chelated |
| Copper (Cu) | 0.002% chelated |
| Boron (B) | 0.0016% |
| Cobalt (Co) | 0.0005% |
| Molybdenum (Mo) | 0.0003% |
| Non-plant food ingredient | 0.01% vitamin B1 (thiamine hydrochloride) |
| Mix rate | 20 ml per gallon (5 ml per quart) |
| Dose range | 5-10 ml per liter, rising as roots develop |
| Solution pH | 5.5-6.5 |
| Use in | Aeroponic cloners, hydroponic systems, rockwool, soilless media and soil |
| Made in | USA |
| Size | 1 quart (946 ml) |
| Net weight | 2.4 lb |
| Finished feed | About 47 gallons at 20 ml per gallon |