Integra Boost 2g Humidiccant Bulk 55% - 2,000 Pack

Integra Boost 2g 55% Humidity Packs Deliver Two-Way Moisture Control

A sealed jar drifts every time the lid comes off, and this salt-free humidiccant answers by moving vapor until the headspace settles near 55% RH. What is inside the packet is the part worth knowing. The fill is a plant-based glycerin and water blend, 100% salt-free and 99% biodegradable. No crystals migrate onto what sits against the packet, which is the practical difference from a salt-solution pack. Vapor comes off as pure water, so the aroma that went into the jar is the one that comes back out. The membrane is spill-proof and tear-resistant. One packet covers 4 to 7 grams, which is a quarter-ounce jar rather than an eighth or an ounce.

Bulk Humidity Control Packs for Curing and Long-Term Storage

The bulk case runs 2,000 packets with no individual overwrap and no humidity indicator cards, which is what makes wholesale volume workable. That trim drops the per-pack cost on a packaging line. The sequence matters more than it looks. Open the case, pull what a run needs, and close it back up the same session. Drop one in at jar-fill rather than after the lid is on. Then leave it a week before judging, and check by feel rather than trusting the pack blind. Shelf life is two years from the date of manufacture, so long as the packs stay sealed. For long term storage that depth is what makes a 2,000 count case a reasonable thing to hold.

Key Features

• Two-Way Humidity Control at 55% RH: Adds moisture to a jar that has run dry and pulls it back when the container is opened often.
• Salt-Free Humidiccant Formula: Plant-based glycerin and water means nothing gritty ends up on the material resting against the packet.
• 4–7 g Coverage per 2-Gram Packet: Matched to quarter-ounce jars and sample bags, where an oversized pack would overshoot the headspace.
• 99% Biodegradable, Plant-Based Fill: Spent packets go out with room waste instead of into a hazardous-material stream.
• FDA Compliant for Food Contact: Rated to sit directly against stored product, which is how these get used in practice anyway.
• Printed with Food Grade Inks: Keeps the printed face safe where the packet touches contents inside a sealed container.
• Spill-Proof, Tear-Resistant Membrane: Stays pliable under repeated handling, so a snagged packet does not empty itself into a jar.
• Aroma and Flavor Neutral: Terpene profile that went into storage is the one that comes back out at the far end.
• 1.73" × 1.77" Packet Footprint: Lies flat under a lid without stealing volume that would otherwise hold product.
• 2,000-Count Bulk Case: Wholesale format for packaging lines, dispensary prep rooms and long-term storage inventory.

Technical Specifications

How Long Do Integra Boost 2g Humidity Packs Last?

In a quarter-ounce jar opened a few times a week, a 2-gram pack typically holds 55% RH for two to four months. Frequent opening and dry ambient air shorten that, while a jar that mostly stays closed can push past six months.

How to Use the 2g Packs in a Bulk Packaging Run

Drop one packet into each container at fill, resting against the contents, and seal immediately. Because the bulk case ships without overwrap, packs begin working the moment the case is opened. Stage only what a run needs and reseal the rest.

Should You Run 55% or 62% RH?

55% runs drier and suits longer holds, denser material, and anything headed for extended storage. 62% keeps more moisture in the flower and is the usual pick for retail jars that move quickly.

Do the Bulk 2,000 Count Packs Include Indicator Cards?

No, the 2,000-count case ships unwrapped with no humidity indicator cards, which is what keeps per-pack cost down. If you need the card for hands-free monitoring, the individually overwrapped 1,000-count case carries one per pack.