The Integra Boost 5 Gallon Curing Bucket Is the Container, Not Just the Packs
This is a sealed vessel you cure inside, holding up to 4 lb of plant material along with the desiccant. The lid closes on a safety latch over a soft O-ring, which is what gives the pail its atmospheric barrier and its odor resistance. Thirty packs of 200 g ship with it. That distinction matters against the drying-room version, where packs get set out around an open space and the room is the container. Here the headspace is small and the barrier is the pail itself. So the same chemistry acts on four pounds rather than on a room of moving air. For curing at that scale it is the tighter of the two arrangements.
Absorb-Only Chemistry With a 50% RH Floor
The packs take water out of the air and hold it, absorbing up to 158% of their own weight, and they never give it back. That is the opposite of a two-way Boost pack, which releases moisture as well as taking it in. Material still shedding water after a cut needs the one-way kind. Absorption then stops at 50% RH and the packs go quiet below that line. A bucket left over a weekend cannot be pulled down to where material goes brittle. Service life reaches 50 days or more, though a heavy load works through it faster. Spent packs are non-toxic and go out with ordinary waste. Thirty of them in one pail is a season of buffer for a small operation.
Key Features
- Sealed 5 Gallon Curing Vessel: The pail is the container, so the barrier is the lid rather than the room.
- Holds Up To 4 lb: Plant material cures or stores inside the bucket alongside the desiccant.
- Safety Latch and Soft O-Ring Lid: Gives the atmospheric seal and the odor resistance a snap lid does not.
- 30 Count at 200 g Each: Supplied with the bucket, so nothing else has to be sized or sourced.
- 158% Absorption Capacity: Each pack takes on more than its own weight in water before it is finished.
- 50% RH Absorption Floor: The packs stop below that line, so an unattended bucket cannot be over-dried.
- 50 Days or More of Protection: Long enough to cover a full cure and hold material between runs.
- Absorb-Only, Not Two-Way: Pulls moisture one way, which is what freshly cut material needs.
- Non-Toxic and Disposable: Spent packs leave with ordinary waste, with no reclaim procedure to manage.
- No Power or Drain Line: Works where running a dehumidifier and its condensate line is impractical.
Technical Specifications
| Specification | Value |
|---|---|
| Product Class | One-way desiccant (absorb only) |
| Form Factor | 5-gallon bucket with latching lid |
| Packs Included | 30 |
| Pack Weight | 200 g each |
| Bucket Capacity | Up to 4 lb of plant material for curing or storage |
| Moisture Absorption Capacity | Up to 158% of its own weight |
| Lower Humidity Limit | Will not absorb below 50% RH |
| Service Life | 50 days or more of moisture protection |
| Lid | Safety latch with a soft O-ring seal |
| Barrier | Atmospheric barrier with odor resistance |
| Compared With Two-Way Packs | Absorbs only; it does not release moisture back |
| Safety | Environmentally safe; contains no hazardous materials |
| Disposal | Disposable as normal waste |
| Bucket Dimensions | 13.3 in W × 13.2 in L × 15 in H |
| Manufacturer | Integra by Desiccare, Inc. |
| SKU | 748321 |
Is This the Same as a Two-Way Boost Pack?
No. Boost packs hold a set RH inside a jar. These absorb only, which is what material still shedding water needs.
Can the Bucket Over-Dry What Is Inside?
No. Absorption stops at 50% RH, so a pail left over a weekend does not pull material down to brittle.
How Much Material Fits in the Bucket?
Up to 4 lb, cured or stored inside the pail with the packs. The lid seal is what holds the headspace.
How Long Do the Packs Last?
50 days or more of protection. A wetter load works through them faster than a light one does.