Skip to product information
1 of 1
Brand: Integra Boost

Integra Boost - BOOST STICK - BULK - NO Individual Overwrap - NO Humidity Indicator Card - Packed in master case of 1500 w/ doub

Integra Boost - BOOST STICK - BULK - NO Individual Overwrap - NO Humidity Indicator Card - Packed in master case of 1500 w/ doub

SKU: SKU:B80S55J

Ordering a large quantity of this item?
As long as the order total is more than $2K you can:

Regular price $121.15 USD
Regular price Sale price $121.15 USD
Sale Sold out
Shipping calculated at checkout.

Availability: Online | Will Call Locations Stock May Vary

Option
SIZE

The 80 mm Integra Boost Stick at 55% RH, a narrow format that fits tubes and slim packaging where a flat sachet will not. This is the bulk configuration: 1,500 sticks in one double-overwrapped master case, with no individual wrappers and no indicator cards.

View full details

Integra Boost Humidity Sticks 80mm Are the Same Gel in a Different Shape

A stick is not a different product. It is the same fill in a shape that fits where a flat sachet cannot go. Inside is the plant-based glycerin and water blend used across the whole Boost range, salt-free and non-toxic. The membrane is the same spill-proof, tear-resistant material. What changes is geometry. At 80 mm long and narrow, it slides into a tube or a slim container where a flat packet would fold or block the opening. This one holds 55% RH, the drier storage tier. Integra also makes a longer 110 mm stick, which runs at 62% RH and ships 1,200 sticks to a master case.

Where the 1500 Count Bulk Case Stops Being the Right Call

Two limits come with this configuration. There is no individual overwrap and no humidity indicator card. That means the sticks start trading moisture with the room as soon as the case is opened. A case gets worked down in one session rather than left standing on a bench. It also means nothing on a stick tells the person at the far end when it is finished. On a packaging line neither matters, because the stick goes from case to tube in seconds. On a shelf both matter, and there is no overwrapped version of the stick to fall back on. The last limit is quantity. Fifteen hundred sticks is a line quantity, and a small operation will hold it a long time.

Key Features

  • Narrow 80mm Format: Slides into a tube or slim container where a flat sachet would fold or block it.
  • Same Fill as Every Boost Pack: Plant-based glycerin and water, salt-free, behind the same spill-proof membrane.
  • 55% RH Setpoint: The drier of the two storage tiers, which suits long holds and dense material.
  • Two-Way Humidity Control: Releases moisture into dry air and absorbs it back out of damp air.
  • No Individual Overwrap: Sticks ship loose, which is what brings the per-stick cost down.
  • No Indicator Cards: Nothing on a stick reads its state, so replacement is scheduled rather than seen.
  • 1,500 Sticks Per Master Case: One case, double overwrapped around the whole lot rather than around each stick.
  • Work a Case in One Session: Loose sticks start on air contact, so an opened case is run down rather than parked.
  • 110mm Version Also Stocked: The longer stick runs at 62% RH and ships 1,200 to a case.

Technical Specifications

Specification Value
Product Format Boost Stick — narrow stick rather than a flat sachet
Length 80 mm
Relative Humidity 55% RH
Humidity Control 2-way (releases and absorbs moisture)
Total per Case 1,500 sticks
Individual Overwrap None — bulk pack
Humidity Indicator Cards Not included — bulk pack
Case Packaging One master case, double overwrapped
Activation Sticks begin working on contact with air once the case is opened
In-Use Life Typically 2–4 months
Other Stick Offered 110 mm at 62% RH, 1,200 per case
Typical Application Tubes and slim packaging where a flat packet does not seat
Intended Use Cured, dried material in a sealed container — not living plants
Composition Plant-based glycerin and water
Salt Content 100% salt-free
Biodegradability 99% biodegradable
Toxicity Non-toxic; emits pure water vapor only
Food Contact FDA compliant and safe for food contact
Printing Food grade inks
Membrane Spill-proof, tear-resistant, pliable
Flavor / Aroma Impact Does not alter flavors or aromas
Technology Patented 2-way humidity control
Manufacturer Integra by Desiccare, Inc.
Documentation ISO and QPL documentation available from the manufacturer on request
SKU B80S55J

How Is a Stick Different From a Packet?

Only in shape. The fill, the membrane and the two-way control are the same; the stick fits narrow containers a sachet cannot.

Why Are There No Indicator Cards?

This is the bulk configuration. Cards and wrappers are what a retail pack pays for, and dropping both cuts the per-stick cost.

What Other Stick Sizes Are There?

A 110 mm stick at 62% RH, packed 1,200 to a case. This one is the 80 mm at 55% RH.

How Should an Opened Case Be Handled?

Work through it in one session. Loose sticks start on air contact, so an open case keeps running whether or not it is used.