Integra Boost Terpene Essentials Myrcene Builds a Deep Base Note
Line the isolates up and myrcene is the low note. Limonene sits bright at the top and pinene sharp beside it; this one runs underneath both. Integra publishes the aroma as slightly floral and spicy with a pungent kick, musky and earthy. The sources are hops, mango, basil, lemongrass, thyme and bay leaf. It is a botanically sourced food-grade isolate with a standardized terpene concentration, tested clear of heavy metals, pesticides, residual solvents and mycotoxins. The carrier underneath holds 62% RH in both directions, so the jar does not dry down while the aroma crosses over. An infusion that dries a lot out has taken more than it gave.
Musky Terpene Packs for Curing Jars, One Lot at a Time
The routine takes a minute and then a couple of days. Take the pack out of its clear wrapper and discard the No-Ox sachet that has been keeping oxygen off it. Put the pack in with the material and close the jar properly. Leave it 24 to 72 hours and resist checking, because every look vents what has already crossed. One pack treats up to 0.5 oz, so this is jar scale rather than bin scale. Kept airtight between jobs it comes back for a second and third round. The 288 pack master case suits a packer running the step across many small lots. When the nose is right the pack comes out, and an unflavored 55% or 62% pack takes over for storage.
Key Features
- Botanically Sourced Myrcene: Tested free of heavy metals, pesticides, residual solvents and mycotoxins.
- Musky, Earthy Base Note: Rounds out a nose with hop-like depth rather than adding a sharp top note.
- 62% RH Two-Way Base: The same humidity chemistry as classic Boost, so aroma work costs nothing in moisture control.
- 24 to 72 Hour Infusion: Aroma builds across the first days, so the window gets planned into a packaging run.
- Treats Up To 0.5 oz (14 g): Half-ounce jars take one pack; a pound bin needs the 67 g size instead.
- Reusable For Three Infusions: Pull the pack, seal it in a jar, and it carries the next batch without losing its load.
- 288 Packs Per Master Case: Enough depth to hold one aroma in stock across a full production season.
- Individually Overwrapped With No-Ox: An oxygen absorber sits in the wrapper, so the myrcene load is intact at first open.
- 100% Salt-Free Base: Plant-based glycerin and water, so nothing crystallizes onto what it touches.
- FDA Compliant, Food Grade Inks: Cleared for direct contact with the material it sits beside in the jar.
Technical Specifications
| Specification | Value |
|---|---|
| Pack Size | 4 gram |
| Relative Humidity | 62% RH |
| Terpene | Myrcene |
| Aroma Profile | Slightly floral and spicy with a pungent kick; musky and earthy |
| Botanical Sources | Hops, mango, basil, lemongrass, thyme, bay leaf |
| Terpene Type | Botanically sourced food-grade isolate with standardized terpene concentration |
| Tested Free Of | Heavy metals, pesticides, residual solvents, mycotoxins |
| Coverage per Pack | Up to 0.5 oz (14 g) of herbal product |
| Initial Infusion Time | 24–72 hours in a sealed airtight container |
| Reuse | Up to 3 infusions when stored airtight between uses |
| Quantity per Master Case | 288 packs |
| Individual Overwrap | Yes — each pack wrapped with an Integra No-Ox oxygen absorber |
| Packet Dimensions | 2" x 2.375" (base Integra Boost 4 g format) |
| Base Composition | Plant-based glycerin and water |
| Salt Content | 100% salt-free |
| Biodegradability | 99% biodegradable |
| Toxicity | Non-toxic; emits pure water vapor only |
| Food Contact | FDA compliant and safe for food contact |
| Printing | Food grade inks |
| Shelf Life (overwrapped) | 2 years from date of manufacture |
| Post-Infusion Guidance | Swap to an unflavored Integra Boost pack for long-term storage |
| Technology | Patented 2-way humidity control |
| Manufacturer | Integra by Desiccare, Inc. |
| Documentation | ISO and QPL documentation available from the manufacturer on request |
| UPC | 802359002168 |
| SKU | BTM04A62C |
What Does Myrcene Smell Like?
Musky and earthy with a pungent, slightly floral edge. It is the hop and bay leaf side of the aroma range rather than the citrus or pine side.
How Should the Pack Be Stored Between Infusions?
Sealed in an airtight container. Left out on a bench the myrcene load bleeds into the room, and the pack will not carry a second batch.
Does the Terpene Affect Humidity Control?
No. The base chemistry still holds 62% RH. Myrcene is an added aroma payload, not a change to how the two-way pack manages moisture.
When Should the Myrcene Pack Come Out?
Once the aroma has taken. Integra directs you to swap in an unflavored 55% or 62% Boost pack for the storage window that follows.