
S360 Spectral Spinner for Kessil LED Grow Lights
This Kessil spinner is a rotating mount that carries up to six Kessil LED grow lights over a 4 x 4 ft area. It hangs above the canopy and turns continuously, sweeping each light in a circle over the plants. That motion spreads intensity evenly, so no single spot sits under a light all day. Leaves near the edges of the area see more light than they would under a fixed pendant. The spinner holds up to about 21 lb in total. Each arm takes one light, so the layout is set by which lamps you mount and where. Kessil's guidance allows up to two H380 lights, alone or alongside up to four H150 lights. The two H380s belong on opposite arms so the weight stays balanced. More than two H380s falls outside the recommended setup and can void the warranty. Lights are not included, which leaves the spectrum choice open. Mixing lamps with different spectra or intensities builds a custom light recipe from one hang point. A single hang point also keeps the setup tidy in a small tent or cabinet.
Running a Rotating Light Mover Over a Small Canopy
A rotating light mover earns its place where a few compact lamps would otherwise leave bright centers and dim corners. Hang the spinner from a sturdy point, since the load turns all day and a loose hook wanders. Center it over the canopy so each light traces a circle that covers the whole area. Load the arms in matching pairs across from each other to keep the rotation smooth. An unbalanced spinner wobbles as it turns. That wear shows up first in the motor and hanger. Set the hang height so the lights overlap slightly at the edges of their circles. Check plant tops after the first few days, since the brightest band sits under the path of the lamps. Raise the spinner as plants stretch, rather than letting tops close in on a passing light. Route cords so they follow the arms cleanly as the spinner turns. Pair a cooler spectrum with a warmer one to cover both vegetative and flowering needs from one mount. With the lamps moving, a smaller set of lights can reach ground that fixed pendants would miss.
Key Features
- Six Light Positions: Carries up to six Kessil LED grow lights from one hang point.
- Continuous Rotation: Sweeps the lights in a circle to spread intensity evenly across the canopy.
- 4 x 4 ft Coverage: Sized for a 4 x 4 ft tent or grow area.
- Mix and Match Spectra: Combine Kessil lamps with different spectra or intensities on one mount.
- 21 lb Capacity: Supports up to about 21 lb of mounted lights.
- H380 Guidance: Up to two H380 lights on opposite arms, with up to four H150 lights.
Technical Specifications
| Specification | Value |
|---|---|
| Model | Kessil S360 |
| Part number | KSHSP01 |
| Coverage | 4 x 4 ft |
| Light positions | 6 |
| Maximum load | About 21 lb |
| Compatible lights | Kessil LED grow lights; up to two H380, alone or with up to four H150 |
| Motion | Continuous rotation |
| Lights included | No |
| UPC | 654367097731 |
For the full range of lights this spinner carries, see Everything You Need To Know About Kessil LED Grow Lights.