
Kootenay 1000GL Pre-Filter Sizing and Fit
Every Green Line 1000GL leaves the factory with a pre-filter already on it, and this is the replacement for that original sleeve. Its part number is PF1000GL in the Green Line pre-filter range. The sleeve is sized for the 1000GL with a 6 in flange. It measures 12 in across and 20 in long, matching the outside of that filter body. Its job is simple: it stops larger particulate before it can enter and contaminate the carbon. Activated carbon does its work in tiny pores, and fine dust settling on the outer bed blocks those pores. A clean sleeve keeps that outer layer of carbon open to odor molecules for longer. It also keeps airflow steadier, since a dust-caked bed adds resistance the fan has to push against. The sleeve slides over the cylinder and covers the full perforated surface. Changing it takes a couple of minutes and costs far less than replacing the carbon filter itself.
When to Swap a Replacement Pre-Filter on the 1000GL
A 1000GL usually hangs in a mid-size tent or a small room, often right above a canopy that sheds pollen and plant debris. That makes the outer sleeve the first thing to collect fuzz, soil dust and stray leaf bits. Look at it whenever you change a reservoir or flip a light schedule, because color tells most of the story. A sleeve that started bright white and has turned grey is already trapping material the carbon would otherwise absorb. Rooms with carpeted floors, pets nearby or a dusty intake run through sleeves noticeably faster. Shut the fan off before the swap so loose dust is not pulled into the bed as the old sleeve comes off. Work the old sleeve down toward the closed end rather than dragging it across the perforated metal. Pull the new one on evenly, then check that no section of the cylinder is left uncovered. Keeping one spare on the shelf means a dirty sleeve never stays on just because a fresh one was not handy. Over a few grows, that habit can add real months to the working life of the carbon filter.
Key Features
- Made for the 1000GL: Replacement sleeve for the Green Line 1000GL with a 6 in flange.
- 12 x 20 in Sleeve: Sized to cover the full filter body from end to end.
- Protects the Carbon Bed: Stops coarse dust and lint before they clog the carbon pores.
- Steadier Airflow: A clean sleeve keeps fan resistance from creeping up between changes.
- Quick Swap: Slides on and off by hand with the filter still mounted.

Technical Specifications
| Specification | Value |
|---|---|
| Brand | Kootenay Filter |
| Model | Pre-Filter, GL1000 |
| Part Number | PF1000GL |
| Product Line | Green Line |
| Flange | 6 in (fixed flange on the host filter) |
| Diameter | 12 in |
| Length | 20 in |
| Fits | Kootenay Green Line 1000GL with 6 in flange |
| Function | Replacement pre-filter; blocks larger particulate before it reaches the carbon bed |