Skip to product information
1 of 1
Brand: Kootenay

Kootenay Filter Pre-Filter 1250SL | 16 x 49 in, 8 to 14 in Flange

Kootenay Filter Pre-Filter 1250SL | 16 x 49 in, 8 to 14 in Flange

SKU: SKU:151068

Ordering a large quantity of this item?
As long as the order total is more than $2K you can:

Regular price $43.24 USD
Regular price Sale price $43.24 USD
Sale Sold out
Shipping calculated at checkout.

This Kootenay 1250SL pre-filter fits the Standard Line SL1250 carbon filter. It catches dust and debris on its fabric so the carbon underneath stays open and effective.

View full details

Kootenay 1250SL Pre-Filter Fit and Size

The SL1250 accepts an 8 in, 10 in, 12 in or 14 in flange, and this sleeve fits its body with any of them. Its part number is PF1250. It is 16 in in diameter and 49 in long. That extra length suits a filter built to hold a large carbon charge. Larger particles are stopped at the fabric before they can contaminate the bed. On a long filter, dust tends to collect unevenly, and a sleeve evens out that load. Once fine dust reaches carbon, it stays there and blocks adsorption sites. A clean sleeve preserves those sites for odor molecules and keeps resistance low. The SL1250 ships with a pre-filter installed, and this is the matching replacement. Swapping sleeves on schedule is the easiest way to get full life from a big filter.

Handling a Carbon Filter Pre-Filter on a Long Filter

A filter this long is usually mounted horizontally near the ceiling of a large room. In that position, the upper surface of the carbon filter pre-filter collects most of the settling dust. Inspect it from a ladder at least once per crop and after any construction work nearby. Drywall dust and sawdust are especially hard on carbon, so change the sleeve after any renovation. Shut the fan off and support the filter before starting, since a long body can flex as the sleeve moves. Peel the old sleeve back from the cap end, working around the circumference a little at a time. Bag it as it comes free to keep the dust contained. Feed the new sleeve over the cap and pull it along evenly until it reaches the flange end. Check for any bare strip along the bottom where fabric can bunch on a horizontal mount. A clean sleeve on a long filter keeps a large investment in carbon working for its full service life.

Key Features

  • Fits the SL1250: Replacement sleeve for the Standard Line SL1250.
  • 8 to 14 in Flange Builds: Fits the filter body with any of its four flange sizes.
  • 16 x 49 in Sleeve: Covers the full length of a long filter.
  • Even Dust Loading: Spreads coarse dust across the fabric, not the carbon.
  • Direct Replacement: Matches the pre-filter installed at the factory.
Kootenay Filter Pre-Filter 1250SL replacement sleeve

Technical Specifications

Specification Value
Brand Kootenay Filter
Model Pre-Filter, SL1250
Part Number PF1250
Product Line Standard Line
Compatible Flanges 8 in, 10 in, 12 in or 14 in (sold separately)
Diameter 16 in
Length 49 in
Fits Kootenay Standard Line SL1250 (supplied without flange)
Function Replacement pre-filter; blocks larger particulate before it reaches the carbon bed