
Kootenay 1500GL Pre-Filter Dimensions and Fit
The Green Line 1500GL is built around an 8 in flange, and this sleeve is the matching replacement for it. Kootenay Filter catalogs it as part PF1500GL. It is 12 in in diameter and 30 in long, so it wraps the full length of that filter. Larger particles get caught in the fabric instead of working their way into the carbon. That matters because dust does not just sit on the bed; it fills the surface pores that pull odor out of the air. Once those pores are blocked, the carbon behind them is still fresh but no longer doing much. A sleeve in good shape lets the whole depth of the bed share the load evenly. Fans also run easier when the intake surface of the filter is not matted with lint. On a filter this long, the sleeve has a lot of surface area to spread the dust load across. When it is spent, a new sleeve restores that outer surface for a fraction of the price of new carbon.
Keeping a Carbon Filter Pre-Filter Clean on a 1500GL
Growers usually run a 1500GL in a larger tent or a dedicated flower room. The filter often sits horizontally on a shelf or hangs on ratchets near the ceiling, where warm, dusty air collects. A horizontal mount tends to load the top of the sleeve first, so check that side closely. Uneven discoloration is normal and is not a reason to rotate the filter or flip the sleeve around. Plan a change once the fabric looks clearly darker than a new one, or sooner after a big trim session. Trimming and drying in the same space puts a lot of fine plant debris into the air very quickly. With the fan off, slide the old sleeve toward the closed end and lift it away without shaking it out over the canopy. Bag the used sleeve right away so the dust it caught does not drift back into the room. Fit the new one so the fabric sits snug along the full length, with no folds bunched at either end. A fresh sleeve every few cycles is a low-cost way to keep a long filter like this working at full strength.
Key Features
- Fits the 1500GL: Replacement for the Green Line 1500GL with an 8 in flange.
- 12 x 30 in Coverage: Covers the full length of the filter body.
- Coarse-Particle Barrier: Traps lint, dust and plant debris before they reach the carbon.
- Lower Fan Load: Keeps the filter surface open so the fan is not fighting a clogged bed.
- Hand Installation: No tools needed to swap the sleeve.

Technical Specifications
| Specification | Value |
|---|---|
| Brand | Kootenay Filter |
| Model | Pre-Filter, GL1500 |
| Part Number | PF1500GL |
| Product Line | Green Line |
| Flange | 8 in (fixed flange on the host filter) |
| Diameter | 12 in |
| Length | 30 in |
| Fits | Kootenay Green Line 1500GL with 8 in flange |
| Function | Replacement pre-filter; blocks larger particulate before it reaches the carbon bed |