Netafim TechLock Male Adapter 17mm to 3/4 in MPT
The Netafim TechLock male adapter transitions 17mm dripline to a 3/4 in MPT thread. The TechLock end locks onto the tubing while the male thread spins into a valve, riser, or PVC fitting. The joint holds to 100 psi with no clamp or glue on the tubing side. Each bundle holds 25 adapters.
Joining 17mm Dripline to Threaded Pipe and Valves
This is the fitting that starts or ends a Techline run at a threaded connection. Growers thread the 3/4 in MPT into a valve outlet or PVC female fitting with tape. Then push the 17mm line into the TechLock collar until it grabs. UV-resistant material holds up on above-ground mains. Keep a bundle on hand for tapping new zones off a manifold.
Key Features
- 17mm TechLock end: Locks onto 16/17mm dripline without clamps or glue.
- 3/4 in MPT thread: Spins into valves, risers, and PVC female fittings.
- 100 psi rated: Holds full drip-zone pressure at the transition.
- UV-resistant: Stands up on above-ground mains in direct sun.
- 25 per bundle: Enough to start every zone in a mid-size layout.
Technical Specifications
| Specification | Value |
|---|---|
| Model | TLCK075MA (32500-080000) |
| Type | Male adapter, TechLock x MPT |
| Tubing Side | 17mm TechLock (fits 16/17mm dripline) |
| Thread Side | 3/4 in MPT |
| Pressure Rating | 100 psi |
| Pack Size | 25 |