Netafim 0.3 GPH Drip Stake Assembly for Slow, Even Wetting
Small pots, plugs, and propagation trays drown under a full-flow emitter that dumps water faster than the media can hold. The Netafim 0.3 GPH drip stake assembly meters a gentle 0.3 GPH through a 36-inch white tube to an angle barbed stake. That slow pour wets the media evenly and soaks in without running off the surface. The angled stake presses in and holds the outlet right at the plant base. A delicate crop then gets steady moisture instead of a flood it cannot use.
Woodpecker Jr Dripper With 94 Percent Uniformity
A pressure-compensating Woodpecker Junior dripper holds 0.3 GPH at 94 percent uniformity, even on sloped benches. Its CNL check valve closes at 7 PSI, so every dripper on the line starts and stops together and no water backflows. The assembly runs on Super Flex UV White tubing and works across a 10 to 45 PSI range. Sold 25 to a pack, it fits out a full tray or bench of small containers in one build. For plugs and propagation, that slow, even feed keeps roots damp without ever drowning them.
Key Features
- Low flow: 0.3 GPH for small pots, plugs, and propagation
- Even wetting: Slow pour that wets media without run-off
- Tube and stake: 36-inch white tube with angle barbed stake
- Pressure-compensating: 94 percent uniformity even on slopes
- CNL check valve: Closes at 7 PSI for synced start and stop
Technical Specifications
| Specification | Detail |
|---|---|
| Model | 01WPCJL1.2AW-36 |
| Flow Rate | 0.3 GPH / 1.2 LPH (pressure-compensating) |
| Tube Length | 36 in |
| Tubing | Super Flex UV White PE |
| Stake | Angle barbed stake |
| Uniformity | 94% |
| Check Valve | CNL, closes at 7 PSI |
| Pressure Range | 10 to 45 PSI |
| Pack Size | 25 assemblies |