Check Valve with Orange Pin for High-Pressure Foggers
Foggers and misters that dribble at start-up leave uneven coverage and wet spots under the benches when a zone shuts off. This valve holds each head closed until the line reaches 58 PSI. The whole zone charges before a single nozzle opens. Every fogger then fires at full pressure at the same moment, which is what turns a coarse dribble into a fine, even mist. The orange pin sets a higher opening point than the blue or purple valves, matching the pressure that fogging systems actually run at. A grower drops one into each assembly and gets a crisp, uniform start across the entire run.
Anti-Drain Valve That Stops Low-Point Weeping
When the pump cuts out, the valve closes at 26 PSI and seals the head before the line can bleed down. That stops the low-point drainage that otherwise puddles under the lowest nozzles and drips onto plants after the cycle. Growers pair the orange pin with Netafim sprinkler, mister, and fogger assemblies where a clean cutoff matters. Because every head starts and stops on the same pressure, dosing stays consistent from the first cycle to the last. The result is a tidy bench, even humidity, and no wasted water between runs.
Key Features
- 58 PSI opening pressure: Charges the zone before any head fires
- 26 PSI closing pressure: Seals off to stop low-point weeping
- Orange pin rating: Higher set point than blue or purple valves
- Fogger and mister ready: Fits Netafim sprinkler, mist, and fog assemblies
- Uniform start and stop: Every head opens and closes together
Technical Specifications
| Specification | Detail |
|---|---|
| Model | 63000-003205 (0340037-B) |
| Pin Color | Orange |
| Opening Pressure | 58 PSI |
| Closing Pressure | 26 PSI |
| Function | Anti-drain check valve, uniform start/stop |
| Compatible With | Netafim sprinkler, mister, and fogger assemblies |
| Best Suited For | Higher-pressure fogging systems |
| Origin | Made in USA |
| Pack Quantity | 25 per bag |