Netafim CoolNet Pro Fogger for Propagation Humidity and Cooling
This 4-nozzle CoolNet Pro head builds a zone of saturated humidity for rooting and propagation. It puts out roughly 8.1 GPH at 60 PSI as a fine ~65-micron fog, wetting the air without soaking the bench. An integrated check valve opens at 28 PSI, so pulses start and stop clean instead of dribbling. The Purple Pin is the standard-flow version in the CoolNet line. Growers hang it 18 to 30 inches above the bench and space heads about 36 inches apart.
A 4-Way Propagation Fogger That Pulses Clean
The 28 PSI check valve is what keeps output crisp, cutting the drips that fog a bench unevenly. Four nozzles per head spread the fog wide. Fewer heads cover a propagation zone. Run the line around 60 PSI to hit the rated 8.1 GPH and the fine droplet size. One thing to add: these are the fogger heads, so pair them with a weighted hanging assembly (12", 18", 24", or 36"). The 25-pack scales a room or restocks worn heads in one go.
Key Features
- 4-Nozzle Fogger, Purple Pin (Std): Spreads fog wide so fewer heads cover a propagation zone.
- 8.1 GPH @ 60 PSI: Fine ~65-micron fog builds saturated humidity without soaking the bench.
- Check Valve (28 PSI Opening): Keeps pulses crisp and cuts drips between cycles.
- Spacing Guidance: Hang 18–30" above the bench and space heads about 36" apart for even coverage.
- 25-Pack: Scales a propagation room or restocks worn heads; hanging assembly sold separately.
Technical Specifications
| Specification | Value |
|---|---|
| Configuration | 4-nozzle (4-way) fogger, Purple Pin (standard) |
| Flow Rate | 8.1 GPH @ 60 PSI (~2 GPH per nozzle) |
| Droplet Size | ~65 micron |
| Check Valve | 28 PSI opening pressure |
| Install Height | 18–30 in above bench |
| Spacing | ~36 in between heads |
| Pack | 25 (hanging assembly sold separately) |
| Model | NET-0303420LL-B |
| SKU | 63100-058397 |