Netafim Hanging Sprinkler Extension for Drops Past 48 Inches
Standard hanging drops top out around 48 inches, which leaves the heads stranded high above a tall crop. The Netafim hanging sprinkler extension solves that, lengthening a mister or fogger drop well past the 48-inch reach. It runs on Netafim Super Flex UV White 4/7mm polyethylene tubing, the same line used across the hanging assembly range. A barbed end seats into the supply line, and a female connector takes a sprinkler, mister, or fogger head with a check valve. The head then lands at canopy level instead of firing from the rafters.
Reach Tall Crops and High Trusses From an Overhead Grid
Growers with tall benches, raised gutters, or high trusses use this extension to drop heads down where the crop actually sits. The UV-resistant plastics hold up under constant greenhouse light and moisture across long production runs. Since it is an extension piece, it carries no stabilizer weight of its own and pairs with a weighted base assembly to hang plumb. Sold 500 to a case, it covers a full house of long drops in one build. For tall-crop houses, that extra reach puts even coverage on the canopy instead of the aisle.
Key Features
- Extended reach: Builds hanging drops longer than 48 inches
- Tubing: Netafim Super Flex UV White 4/7mm PE line
- Dual connection: Barbed supply end, female head connector
- Head ready: Takes sprinkler, mister, or fogger heads with check valves
- Case size: 500 extensions per case for full greenhouse builds
Technical Specifications
| Specification | Detail |
|---|---|
| Component | Hanging drop extension (no weight) |
| Use Length | For drops over 48 in |
| Tubing | Super Flex UV White 4/7mm PE |
| Supply Connection | Barbed end |
| Head Connection | Female, for sprinkler/mister/fogger with check valve |
| Material | UV-resistant plastic |
| Pack Size | 500 per case |