Skip to product information
1 of 1
Brand: Netafim

Netafim Micronet 1/2 in Male Adapter x Male Micronet, 25-Pack

Netafim Micronet 1/2 in Male Adapter x Male Micronet, 25-Pack

SKU: SKU:63000-002360

Ordering a large quantity of this item?
As long as the order total is more than $2K you can:

Regular price $41.40 USD
Regular price Sale price $41.40 USD
Sale Sold out
Shipping calculated at checkout.

KILLER PRICE
This item is heavily discounted and may not qualify for discounts.

This Netafim Micronet adapter has a 1/2 in male thread on one end and a male Micronet stem on the other. It lets a sprinkler with a 1/2 in female thread, such as the Vibro-Spray HF, mount on a hanging sprinkler assembly. Netafim packs them 25 to a bag.

View full details

Netafim Micronet Adapter for Threaded Overhead Sprinklers

Overhead sprinklers in greenhouses and nurseries usually hang on drops below the supply line. The drop ends in a Micronet connection, while many sprinkler heads use a threaded base. This Netafim part joins the two. Its top end carries a 1/2 inch male thread. The sprinkler's female-threaded base screws onto that thread. Its bottom end is a male Micronet stem that plugs into the hanging assembly. Netafim lists it for use with the Vibro-Spray HF sprinkler, which has a 1/2 inch female threaded connection. That sprinkler is rated at a nominal 1 gallon per minute at 30 psi. With the adapter in place, the threaded head hangs on the same drop hardware used for other overhead emitters. Heads with a male thread do not fit, since both ends of the adapter are male. Netafim sells this part in bags of 25 only. One bag covers 25 drops, so count the heads on each line first.

Fitting the Adapter on a Hanging Sprinkler Drop

Shut off and drain the overhead line before working on the drops. Push the Micronet stem of the adapter fully into the connection at the bottom of each drop. A partly seated stem can leak or pull loose once the line is pressurized. Thread the sprinkler onto the adapter by hand until it is snug. Hand-tight is enough, and overtightening can damage the threads. Check that each head hangs straight and points down at the bench. Add a stabilizer weight if fans push the drops around. Bring the line up to pressure slowly and watch every joint for drips. Reseat any adapter that weeps at the Micronet end. Run the system and confirm that each head throws a full, even pattern. Keep a few spare adapters with the repair kit for quick head swaps during the season.

Key Features

  • 1/2 in Male Thread: Accepts female-threaded sprinkler bases.
  • Male Micronet Stem: Plugs into hanging sprinkler drops.
  • Vibro-Spray HF Match: Listed by Netafim for this sprinkler.
  • Hand Assembly: Push-in stem and hand-tight thread.
  • 25 Per Bag: Sold in bag quantities only.
Netafim 1/2 in male x male Micronet adapter with sprinkler

Technical Specifications

Specification Value
Brand Netafim
Item Number 63000-002360
Model Number 032066208-B
Type Sprinkler adapter
Sprinkler Side 1/2 in male thread
Assembly Side Male Micronet
Use Mounts a threaded sprinkler on a hanging sprinkler assembly
Listed Sprinkler Vibro-Spray HF (1/2 in female thread, 1 GPM nominal at 30 psi)
Pack Quantity 25 (bag quantities only)