
Netafim Super Flex UV White Tubing 30 in Pre-Cut Drops
Cutting feeder drops from a coil one at a time slows a build and leaves ragged, uneven lengths across a bench. The Netafim Super Flex UV white tubing 30 in skips that step, arriving pre-cut in ready 30 inch drops. It is the soft 5/3mm micro tube that carries water from a lateral barb down to a spray stake or dripper. The white wall resists UV, so it holds up on above-ground runs instead of going brittle. Each pack holds 100 lengths, enough consistent drops to fit out a full bench.
Building Spray-Stake and Dripper Drops from Pre-Cut Tube
Growers push one end onto a manifold or lateral barb and the other onto a stake or nozzle, and the drop is done. The 30 inch length reaches from a higher lateral down into taller pots and deeper containers with room to spare. Pre-cut lengths keep assembly fast and every drop the same, so a bench looks and waters uniform. The soft wall seats on Netafim barbs by hand, with no tools and no fighting a stiff tube. That mix of reach and speed is what makes a stake-and-dripper build go quickly.
Key Features
- Pre-cut 30 in lengths: Ready feeder drops with no cutting from a coil.
- 5/3mm Super Flex: Soft 5mm OD x 3mm ID micro feeder tube.
- UV-white wall: Holds up above-ground and blends with white lines.
- 30 in reach: Drops from a higher lateral into taller pots.
- 100 per pack: Enough drops to fit out a bench.
Technical Specifications
| Specification | Value |
|---|---|
| Model | 15FPEW53 (30 in) |
| Type | Pre-cut Super Flex micro tube |
| OD / ID | 5mm / 3mm |
| Length | 30 in |
| Color | UV white |
| Pack Size | 100 |