Netafim UniRam 18mm, 12in spacing, 0.6 GPH 1000ft coil

Netafim UniRam 18mm Dripline at 12 in Spacing, 0.6 GPH

For closely planted rows and beds, a dripline that wets evenly end to end beats a string of separate emitters every time. The Netafim UniRam 18mm dripline carries pressure-compensating emitters molded right into the wall, spaced every 12 in at 0.6 GPH. That pressure compensation holds the flow even from the first emitter to the last across a 1000 ft run or a sloped bed. The tight 12 in spacing gives near-continuous wetting where wider gaps would leave dry ground between plants. Its CNL emitters self-flush and will not drain or siphon, so the line starts clean every cycle.

Laying Heavywall Dripline Down a Row or Bed

Growers roll the heavywall line down a row and tie it in with 17mm fittings off the mainline, above ground or buried. Because every emitter is pressure-compensating, run length and elevation stop shifting the output, so the whole bed drinks the same 0.6 GPH. The 12 in spacing suits close plant spacing where 18 in or 36 in gaps would leave dry pockets between roots. CNL keeps the line from draining between cycles and clears grit on start-up, cutting clogs over a long season. A single 1000 ft coil lays out a full block of rows without a mid-run joint.

Key Features

• 0.6 GPH pressure-compensating emitters: Even flow across long runs and slopes.
• 12 in emitter spacing: Near-continuous wetting for closely planted rows.
• Heavywall 18mm: Durable line for above-ground or subsurface runs.
• CNL self-flushing: Non-leak, anti-siphon, and clears grit on start-up.
• 1000 ft coil: Enough dripline for a full block of rows.

Technical Specifications