
Netafim UV White/Black PE Tubing 1 in for Supply Lines
The line that feeds an entire zone cannot afford to cook in the sun or grow algae in the dark. The Netafim UV white/black PE tubing 1 in is built to dodge both. Its co-extruded wall pairs a white outer skin that reflects heat and shrugs off UV with a black inner wall that blocks light. That dark core stops algae from taking hold inside. It measures 1.06 in ID x 1.20 in OD and takes standard 1 in insert fittings without adapters. Low-density polyethylene bends around corners and headers without kinking, and this 100 ft roll carries a bench or a run between rows.
Running a 1 in Mainline Through a Greenhouse
Growers lay it as the mainline down a bench or between rows, then punch it for dripper and sprinkler takeoffs wherever a zone needs feeding. The white skin keeps the water cooler under lights and sun than black pipe, which spares roots from a warm first pulse. That same skin resists UV instead of going brittle, so the line lasts seasons outdoors rather than months. The black core keeps the inside clear where clear or white-only tubing would green up with algae. Connect it with 1 in insert or barbed fittings and it drops into an existing system clean.
Key Features
- Co-extruded white-over-black: Reflective UV-resistant skin over an algae-blocking core.
- 1.06 in ID x 1.20 in OD: Takes standard 1 in insert fittings.
- White outer skin: Runs cooler and resists UV cracking under sun and lights.
- Black inner wall: Blocks light so algae cannot grow in the line.
- 100 ft roll: Supply mainline for a bench or row.
Technical Specifications
| Specification | Value |
|---|---|
| Model | 14W106120-01 |
| Inner Diameter | 1.06 in |
| Outer Diameter | 1.20 in |
| Nominal Size | 1 in |
| Material | Low-density polyethylene (white/black co-extruded) |
| Roll Length | 100 ft |