Skip to product information
1 of 1
Brand: PHOTOBIO

PHOTOBIO X 16AWG White Cable Harness | 110-120V 5-15P | 10 ft

PHOTOBIO X 16AWG White Cable Harness | 110-120V 5-15P | 10 ft

SKU: SKU:CHE1063010W

Ordering a large quantity of this item?
As long as the order total is more than $2K you can:

Regular price $17.71 USD
Regular price Sale price $17.71 USD
Sale Sold out
Shipping calculated at checkout.

KILLER PRICE
This item is heavily discounted and may not qualify for discounts.

Availability: Online | Will Call Locations Stock May Vary

10-ft PHOTOBIO X 16AWG cable harness with a NEMA 5-15P plug, IP-rated mini connector, and a white UV-resistant jacket — built as a 5-15P 120V power cord for Phantom PHOTOBIO CX, MX, T, and TX LED fixtures.

View full details

5-15P 120V power cord for plug-and-play LED installs

The PHOTOBIO X 120V harness routes 110-120V power to LED grow lights through a 10-foot 16AWG cable. A NEMA 5-15P plug ties the cable to standard residential and grow-room outlets without rewiring the panel. The IP-rated mini connector at the fixture end resists dust and the humidity swings common in flower rooms. Its white UV-resistant jacket bounces stray photons back to the canopy rather than absorbing them. 16AWG copper handles the lighter 120V draw without warming under a sustained lights-on cycle.

5-15P 120V power cord for the PHOTOBIO X fixture line

Growers typically run the 120V harness in tents and small commercial rooms where a 240V branch isn't yet pulled. The cable drops in on Phantom PHOTOBIO CX, MX, T, and TX fixtures already configured for 110-120V branch circuits. Place the cable along the rear truss so the locking strain relief faces away from the canopy mist line. That keeps the connector dry during foliar sprays and avoids tugging when you pull a fixture for cleaning. The 10-foot run reaches across most 4x4 footprints without an extension, which keeps the breaker count honest. And the white jacket reads at a glance during a 3 a.m. fixture-down troubleshoot when the canopy lights are off. On smaller rooms you can chain a few low-draw LED bars per 15A circuit before reaching for the 240V harness sibling. That keeps the room growing while you plan the panel upgrade for 208-240V or 277V on the next install.

Key Features

  • NEMA 5-15P 120V plug: Standard 110-120V receptacle pattern that fits any household or grow-room outlet.
  • 16AWG copper, 10-foot reach: Carries continuous 120V load across a single tent or rack without splicing.
  • IP-rated mini connector: Sealed plug-and-play termination resists dust and runoff in flower rooms.
  • White UV-resistant jacket: Bounces stray photons back to the canopy and stays visible at low light.
  • Built for PHOTOBIO CX, MX, T, TX: Drop-in fit on the Phantom PHOTOBIO LED power lead family.

Technical Specifications

Specification Value
Voltage 110-120V
Plug Pattern NEMA 5-15P
Conductor 16AWG copper
Length 10 ft
Connector Mini IP-rated plug-and-play
Jacket White, UV-resistant
Compatible Fixtures PHOTOBIO CX, MX, T, TX