Skip to product information
1 of 1
Brand: PHOTOBIO

PHOTOBIO X 16AWG White Cable Harness | 208-240V 6-15P | 10 ft

PHOTOBIO X 16AWG White Cable Harness | 208-240V 6-15P | 10 ft

SKU: SKU:CHE1063015W

Ordering a large quantity of this item?
As long as the order total is more than $2K you can:

Regular price $17.71 USD
Regular price Sale price $17.71 USD
Sale Sold out
Shipping calculated at checkout.

KILLER PRICE
This item is heavily discounted and may not qualify for discounts.

Availability: Online | Will Call Locations Stock May Vary

10-ft PHOTOBIO X 16AWG cable harness with a NEMA 6-15P plug, IP-rated mini connector, and a white UV-resistant jacket — built as a 6-15P 240V power cord for Phantom PHOTOBIO CX, MX, T, and TX LED fixtures.

View full details

6-15P 240V power cord for plug-and-play LED installs

The PHOTOBIO X 240V harness delivers 208-240V power to LED grow lights through a 10-foot 16AWG cable. A NEMA 6-15P plug ties the cable to standard 240V outlets without rewiring the panel. The IP-rated mini connector at the fixture end resists dust and the humidity swings common in flower rooms. Its white UV-resistant jacket bounces stray light back to the canopy rather than absorbing it. The 16AWG conductor handles continuous load without warming under a sustained draw across the cycle.

6-15P 240V power cord for the PHOTOBIO X fixture line

Growers typically wire a 6-15P 240V power cord per fixture in single-row tents and double-row commercial racks. The cable drops in on Phantom PHOTOBIO CX, MX, T, and TX fixtures already configured for 208-240V branch circuits. Place the cable along the rear truss so the locking strain relief faces away from the canopy. That keeps the connector dry during mist cycles and avoids tugging when you pull a fixture for cleaning. The 10-foot run reaches across most 4x8 footprints without an extension, which keeps the breaker count honest. And the white jacket reads at a glance during a 3 a.m. fixture-down troubleshoot when the canopy lights are off. Pair the cable with the 240V daisy chain trunk to consolidate trunk wiring on dense commercial benches. That cuts conduit pulls in half and keeps the panel breakdown legible after a few cycles of fixture rotation.

Key Features

  • NEMA 6-15P 240V plug: Standard 240V receptacle pattern that ties to existing panels without rewiring.
  • 16AWG copper, 10-foot reach: Carries continuous 208-240V load across a single rack without splicing.
  • IP-rated mini connector: Sealed plug-and-play termination resists dust and runoff in flower rooms.
  • White UV-resistant jacket: Bounces stray photons back to the canopy and stays visible at low light.
  • Built for PHOTOBIO CX, MX, T, TX: Drop-in fit on the Phantom PHOTOBIO LED power lead family.

Technical Specifications

Specification Value
Voltage 208-240V
Plug Pattern NEMA 6-15P
Conductor 16AWG copper
Length 10 ft
Connector Mini IP-rated plug-and-play
Jacket White, UV-resistant
Compatible Fixtures PHOTOBIO CX, MX, T, TX