ProGuard Defender DXB 50 Air & Surface Sanitizer, No-Ozone | 500 sq ft

ProGuard Defender for Low-Humidity Trim, Packaging and Clone Rooms

Trim rooms, packaging rooms and corridors see plenty of foot traffic but little humidity and almost no airflow. Innovative Solutions built this wall unit for those spaces, where spores ride in on clothing, carts and trays. It pairs an ARC photocatalytic oxidation cell with a bipolar ionization module. The cell converts moisture in the air into a dry hydrogen peroxide vapor. The ions then carry that vapor across still air to benches, bins and walls. This model runs a modified ARC cell that produces no ozone, which suits rooms where staff work full shifts. Each unit covers up to 500 sq ft. The housing measures 12 x 12.4 x 3.1 in and sits flat against a wall. It draws 15 to 22 W from a standard outlet and runs 24/7. The maker lists clone rooms, trim and packaging rooms, extraction rooms, vaults, corridors and offices as target spaces.

Running an Air and Surface Sanitizer in Processing Space

After harvest, the flower spends days on benches, in bins and under trimmers' hands. Those are the hours when a stray spore can turn into a failed microbial test. Mount the unit high on the wall with the exhaust port facing down, away from the door. A long corridor does better with a unit near its midpoint than at one end. Run it around the clock, because a unit that only runs during the shift gives the overnight hours back to mold. Clone rooms gain from it too, since young cuttings stay protected before they move into the hydroponic system. It takes the DXB 100 pre-filters, so one filter pack covers both models. Change them every three to four months, or sooner in a trim room full of fine plant dust. The ARC cell gets replaced once a year to keep output steady. Its cell is tuned for dry, low-traffic air, so a dense, humid flower room sits outside its brief. Keep doors, carts and cleaning routines tight as well, because the unit supports good hygiene rather than replacing it.

Key Features

• No-ozone ARC cell: The modified cell suits trim and packaging rooms where people work full shifts.
• 500 sq ft per unit: Corridors and larger processing areas take several units spaced along the walls.
• Low-humidity tuning: The cell is optimized for low airflow, low plant density and drier air.
• Bipolar ionization: Charged ions move the vapor through still air to work surfaces instead of waiting at a filter.
• Built for 24/7 running: The low running draw makes round-the-clock operation practical.
• Shared pre-filters: It accepts the DXB 100 filters, changed every three to four months.
• Two-year warranty: Innovative Solutions covers the unit for two years.

Technical Specifications