Secret Jardin Dark Propagator 60 v4.0 DP60 Propagation Tent 24 x 16 x 24 in

Secret Jardin Dark Propagator 60 for Cuttings and Mothers

The DP60 is a low, horizontal tent built for plants under 30 in tall, so it works as a nursery and mother-plant room. Assembled it measures 24 x 16 x 24 in (60 x 40 x 60 cm) and holds about five cubic feet of air. The frame is Q195 chrome-plated steel in 16 mm poles with polypropylene corners. Inside, the canvas is M210D Mylar, and a double-flap zip keeps the space lightproof while the room around it stays lit. A removable Mylar water tray covers the floor to catch runoff from a tray of cubes or plugs. The handling tube across the top carries 20 lb, enough for a slim LED bar and a compact carbon filter. About 20 W of efficient LED covers cuttings, and around 40 W carries small vegetative plants. Air moves through two DF16 ducting flanges with a 4 in duct connector and a light baffle, plus a separate cable flange. With a filter inline, a fan moving 30 CFM changes the air every two minutes, and 6 CFM does it every four. Without a filter, those fan figures can drop by roughly forty percent. Fifteen CableIT clips and a PatchIT repair kit come in the box, and the whole tent weighs 7.3 lb.

Running a Small Propagation Tent Inside the Main Room

Most growers park a tent this size on a bench or shelf inside the main room, so cuttings get their own humidity and light schedule. Clones under a dome root well at the lower light level, then the brighter setting carries them through early veg before they move on. Hang the LED bar from the top tube and keep it close, because the short ceiling leaves little room to raise it. Humidity climbs quickly in such a small volume, so a little extraction fan on a cycle timer keeps condensation off the Mylar. Pull fresh air in through the lower flange and exhaust high, and the light baffle stops leaks where the duct passes through. The water tray lifts out for cleaning, and the canvas wipes down between runs, which matters when cuttings rot easily. A mother plant kept short with regular pruning can live in here for months. The honest limit is height. Anything you plan to flower to full size will outgrow the ceiling fast, so treat this as the nursery stage. Assembly takes about fifteen minutes, and because the tent is lightproof it also doubles as a dark spot for germination in a lit room.

Key Features

• Lightproof Mylar Canvas: M210D Mylar inside and a double-flap zip keep stray light out when the room around it is lit.
• 16 mm Q195 Steel Frame: Chrome-plated poles and polypropylene corners hold their shape with a light and filter hanging.
• Removable Water Tray: The Mylar tray catches runoff from propagation trays and lifts out for cleaning between batches.
• Ducting and Cable Flanges: Two DF16 flanges, a 4 in connector, a light baffle and a CF7 cable flange are included.
• 20 lb Handling Tube: The top bar carries a slim LED and a small carbon filter for cuttings or early veg.
• Repair Kit and Clips: A PatchIT repair kit and 15 CableIT clips for cables and nets come in the box.

Technical Specifications