
Shoe Inn ASCR-10 Shoe Cover Remover for Low to Medium Traffic
The Shoe Inn ASCR-10 takes used covers off at the exit, so nobody bends down to peel a dirty bootie by hand. It suits low to medium traffic, such as a single flower room or a small processing suite. Suction from a vacuum unit does the work. The cover is drawn off the shoe and carried into a collection canister. That canister holds 10 gallons, enough for 100 or more covers depending on the type. Used covers go straight into the canister instead of an open trash can by the door. The machine plugs into a standard 120V outlet. Its footprint is roughly 2 ft 8 in on each side. The full system weighs about 80 lbs. The remover housing combines stainless steel, ABS plastic and powder-coated steel. The canister case is powder-coated steel. Its look matches the Shoe Inn dispensers, so an entry and an exit can share one clean setup.
Placing a Vacuum Removal System at the Exit
Placement is flexible because the canister and power unit do not have to sit beside the remover. They can be installed up to about 250 ft away for a remote setup. That keeps the collection bin out of a tight changing area. The power unit accepts a HEPA filtration bag. A HEPA bag helps keep fine dust from blowing back into a clean space. Pair the remover with Shoe Inn covers on the way in, so the whole gowning loop stays hands-free. Covers come off the same way every time, which keeps exits quick at shift change. Watch suction strength as the canister fills. A drop in pull usually means the bag needs emptying or the hose needs checking. Keep the canister lid closed between uses so collected covers stay contained. Staff never handle a used bootie, which matters after walking through a room with pest pressure. Set it up wherever people leave a grow room carrying debris on their feet.
Key Features
- Hands-Free Removal: Suction takes the used cover off, so hands stay away from dirty booties.
- 10-Gallon Canister: Collects 100 or more covers, depending on the cover type.
- Remote Placement: The canister and power unit can be installed up to about 250 ft away.
- HEPA Ready: The power unit accepts a HEPA filtration bag.
- Standard Power: Plugs into a regular 120V wall outlet.
Technical Specifications
| Specification | Value |
|---|---|
| Model | ASCR-10 |
| Canister Capacity | 10 gallons, 100+ covers (varies by type) |
| Footprint | About 2 ft 8 in x 2 ft 8 in |
| Weight | About 80 lbs |
| Power Source | Standard 120V outlet |
| Remover Materials | Stainless steel, ABS plastic, powder-coated steel |
| Canister Material | Powder-coated steel |
| Filtration | Accepts a HEPA filtration bag |
| Remote Installation | Canister and power unit up to about 250 ft from the remover |
| Recommended Use | Low to medium volume |