Shoe Inn Fabric Shoe Covers in Heavy-Duty 40 Gram Polypropylene
These Shoe Inn covers are made from spunbond polypropylene with a weight of 40 grams per square meter. That heavier nonwoven fabric is rated for good durability. The fabric still breathes, which matters in a warm flower room. It is also low lint, so fewer fibers end up on plants or trim trays. Seams are heat sealed rather than stitched. An elastic band at the ankle gives a one-size-fits-most fit. Each cover measures 5.5 in tall and 14 in long. The blue color makes covered shoes easy to see at a glance. Shoe Inn validates them for cleanrooms up to Class 100, or ISO Class 5. That approval comes from the Ultraclean Products Approval Laboratory under Federal Standard 209E and ISO 14644-1. They are not waterproof, so keep them for dry rooms and walkways.
Using Agriculture Shoe Covers Room to Room
A case holds 2,400 covers, or 1,200 pairs. They come in 30 bundles of 80 covers each. Every bundle is clipped for loading straight into a Shoe Inn Fusion or Stay dispenser. Slide the clips down the guide rails, then pull the ribbon, cardboard and plastic strips. The covers can also be pulled on by hand when no dispenser is set up. In a grow facility they work well at the entrance to veg and flower rooms. They also suit drying rooms, trim rooms and packaging areas where floors stay dry. Staff walking between rooms should switch to a fresh pair at each door. That habit limits how far soil, pests and spores travel on shoes. Toss used covers in a lined bin at the exit, never back on the shelf. Keep spare bundles sealed in the case until they go into the machine.
Key Features
- 40 Gram Polypropylene: Heavy-duty spunbond fabric rated for good durability.
- Breathable and Low Lint: Nonwoven material lets air through and sheds few fibers.
- Elastic Ankle: A one-size-fits-most band holds the cover in place.
- Dispenser-Ready Bundles: 80 covers per clipped bundle, made for Fusion and Stay machines.
- Cleanroom Validated: Approved for cleanrooms up to Class 100 / ISO Class 5.
Technical Specifications
| Specification | Value |
|---|---|
| Model | 7FAB-80CS |
| Material | Spunbond polypropylene, 40 g/m² |
| Seams | Heat sealed |
| Color | Blue |
| Cover Size | 5.5 in H x 14 in L |
| Bundle | 80 covers (40 pairs) |
| Case | 2,400 covers (1,200 pairs; 30 bundles) |
| Fit | One size fits most, elastic ankle |
| Waterproof | No |
| Cleanroom Rating | Class 100 / ISO Class 5 (FS 209E, ISO 14644-1) |
| Compatible Dispensers | Shoe Inn Fusion and Stay |