120V ballast power cord for digital and magnetic ballasts
The Smart Volt 6ft cord delivers 120V to digital and magnetic ballasts through a 16-gauge copper conductor. It pairs with Sun System, Galaxy, Lumatek, Phantom, NextGen, Hydrofarm, Solis Tek, and Xtrasun fixtures. The 6-foot length keeps slack honest above the canopy without coiling along the breaker rail. Wall-end and ballast-end terminations meet the standard outlet pattern most grow rooms already have. 16-gauge copper handles the steady draw of an HID ballast over a typical lights-on cycle.
120V ballast power cord that drops in to existing setups
Growers typically reach for a 6-foot cord when the ballast hangs near a ceiling outlet or sub-panel. Place the cord so the ballast end seats fully and the wall plug clears any drip path from the canopy above. On a 120V circuit the cord supports legacy magnetic ballasts and modern digital ballasts without an adapter. Compatibility runs across Sun System 1, Sun System 6, Crop Master, Harvest Pro, Phantom, and Solis Tek lines. The 16-gauge conductor matches the gauge most ballast manufacturers spec for short feeders. And a clean, short 6-foot run reads better at the breaker than a 15-foot cord with three loops behind the unit. Pair the cord with a timer or controller upstream to handle the on/off cycle without touching the ballast switch. That keeps the ballast-end termination from getting cycled mechanically every time the room flips.
Key Features
- 16-gauge copper conductor: Standard ballast-feeder gauge that handles continuous HID ballast draw on a 120V circuit.
- 6-foot cord length: Keeps slack honest above the canopy without coiling along the breaker rail.
- Wide ballast compatibility: Fits Sun System, Galaxy, Lumatek, Phantom, NextGen, Hydrofarm, Solis Tek, Xtrasun, and more.
- 120V North American input: Drops in to standard household and grow-room outlets without adapters.
- Digital and magnetic ballast support: Single cord covers both legacy magnetic and modern digital ballast designs.
Technical Specifications
| Specification | Value |
|---|---|
| Voltage | 120V |
| Gauge | 16-gauge copper |
| Length | 6 ft |
| Ballast Compatibility | Sun System, Galaxy, Lumatek, Phantom, NextGen, Hydrofarm, Solis Tek, Xtrasun, and more |
| Ballast Type | Digital and magnetic |