AC Infinity Submersible Water Pump, 211 GPH (800 L/H), 4.93 ft Lift, 18W

AC Infinity Submersible Water Pump for Reservoirs and Fountains

This compact pump sits fully underwater and moves up to 211 GPH, or 800 liters per hour. Maximum lift is 4.93 ft, enough to raise water from a reservoir to a drip ring or a table on a short stand. It draws 18 W on 110-120V AC at 50/60 Hz. An IP-X8 rating covers continuous submersion. A turn dial on the front opens or narrows the intake, which sets flow and pressure without a separate valve. Removable suction cup feet grip a flat surface and hold the pump in any orientation. The body measures 2.12 x 2.48 x 2.75 in, small enough for a bucket, a tote or an aquarium corner. One small outlet nozzle comes in the box and twists on to take tubing. The impeller and panels pull apart by hand for cleaning. AC Infinity covers it with a two-year warranty, and the UPC is 819137021983.

Running a Small Submersible Pump in a Hydroponic System

Pick the spot first, then press the pump flat onto the floor of the tank and wiggle it until the suction feet grab. Route the power cord so it dips below the outlet, which keeps water from running into the socket. Set the dial low for a gentle top feed or a fountain, and open it up when the water has farther to climb. Flow drops as lift increases, so a pump near the top of its range delivers only a trickle. Check the intake weekly in a recirculating system, since roots and media fragments clog it. To clean, separate the dial casing, rotate the round plate counterclockwise and pull out the impeller. Rinse the parts under water or your preferred cleaner, dry them and put the pump back together the same way. This size suits DWC recirculation, top-feed buckets, small ebb and flow tables and aquariums. Bigger flood tables or long manifold runs call for a higher-flow pump.

Key Features

• 211 GPH Flow: Rated 800 L/H for reservoirs, buckets and fountains.
• 4.93 ft Max Lift: Raises water to drip rings and low tables.
• 18 W Motor: Runs on standard 110-120V household power.
• IP-X8 Waterproof: Built for continuous submersion.
• Turn-Dial Flow Control: Adjusts flow and pressure at the pump.
• Suction Cup Feet: Hold the pump in place in any orientation.
• Tool-Free Cleaning: Impeller and panels detach by hand.

Technical Specifications