Twister Foam Cleaning Cannon (Gun)

Twister Foam Cannon for Fast Trimmer Wash-Downs

This cannon fixes to a pressure washer and turns diluted cleaner into a thick foam that clings to tumblers, blades and housings. The bottle holds 1 liter of mixed solution, enough to coat a full machine in one charge. Its body is rated for 2,900 PSI and a maximum flow of 20 L per minute. Water fed through it should stay at or below 140°F (60°C). The nozzle aperture measures 1.25, and an adjustable head shapes the spray from a narrow stream to a wide fan. Fill the bottle with Simple Green or a similar resin-type cleaner before connecting it. Hot water from the washer mixes with the cleaner as it leaves the nozzle. The foam hangs on vertical panels and inside curves, where a plain rinse runs straight off. That contact time lets sticky material soften evenly across the whole unit. Twister trimmer owners use it as the first step of a regular wash-down routine. It works on any washable harvest equipment that tolerates a pressure washer.

A Resin Cleaning Foam Gun Routine That Works

Start with the trimmer switched off, unplugged and set somewhere water can drain away. Cover or remove any control box and keep electrical parts out of the spray. Blast the machine with an even layer of foam from top to bottom. Let it sit for about five minutes so the cleaner can work into the resin. Hit it with a second coat, and a third if the buildup is heavy. Repeating short rounds breaks down tough deposits better than one long soak. Rinse with clean water once the resin starts lifting off in sheets. Work along blade edges and tumbler bars, where buildup packs in tightest. Check the bottle level between coats so you never spray plain water by mistake. Mix fresh solution for each session rather than leaving cleaner sitting in the bottle. After the job, run clear water through the cannon to flush the nozzle. Let the trimmer air-dry fully before it goes back into service. A quick foam pass after every harvest day keeps cleanup short. Waiting a week means scraping, soaking and a lot more effort.

Key Features

• 1 Liter Bottle: One fill carries enough mixed cleaner to cover an entire trimmer.
• Adjustable Nozzle: Turn the head to switch between a tight stream and a wide fan of foam.
• Pressure Washer Mount: The cannon fixes to a pressure washer and draws cleaner as water flows.
• Clinging Foam: Thick foam stays on vertical surfaces long enough to soften resin.
• Hot Water Rated: Handles warm washer feed for faster breakdown of sticky deposits.
• Repeatable Rounds: Short coats in a row clear heavy buildup without hard scrubbing.

Technical Specifications