Twister T2 Wet Trimmer with Extra Wet Tumbler | 35 lbs/hr

Why This Twister T2 Wet Trimmer Ships With Two Drums

A tumbler change takes seconds on this machine and a week of waiting if you only own one drum. This configuration puts the second one on the shelf from day one. The machine itself trims up to 35 pounds of wet material an hour, or 11 pounds dry, at 19,250 cuts a minute. Cut height sits at 0.040 inches and adjusts in steps of 0.0009 inches per click. That adjustment is why the same frame suits a light manicure and a hard trim. The blade motor is a full horsepower at 750 watts, with a separate 25 watt motor turning the drum. The frame runs 42.5 inches long, 27.5 wide and 32.5 high, and weighs 215 pounds. It draws 15.5 amps at 120 volts, so it wants a circuit of its own rather than a shared one. Everything is stainless with watertight motors, which means the whole machine takes a pressure wash at the end of a shift. Twister covers it for ten years.

What the Extra Wet Tumbler Actually Does

The standard drum carries quarter inch slots, which is the size the machine ships with and the one most wet work uses. A second identical drum is not about slot size, it is about not stopping. Wet material loads a tumbler with resin faster than anything else you will run through it. With a spare on the bench the loaded drum comes out, the clean one goes in, and the line keeps moving. The swap takes seconds and needs no tools. Washing then happens once at the end of the shift rather than three times during it. Both drums go under the pressure washer together, since the motors and electrics are watertight. The blades are nitrided high carbon steel rated to around six hundred hours of work. For a room that harvests wet on a schedule, the second drum pays for itself in the first heavy week.

Key Features

• Two Drums Included: A second standard slot tumbler ships with the machine rather than as a later addition.
• 19,250 Cuts A Minute: Up to 35 pounds of wet material an hour, or 11 pounds dry, from one frame.
• Fine Cut Adjustment: Blade height moves in steps of 0.0009 inches, which separates a light manicure from a hard trim.
• Full Washdown: Stainless build and watertight motors mean the machine and both drums take a pressure wash.
• Tool Free Swap: A resin loaded drum comes out and a clean one goes in without stopping to wash first.
• Ten Year Warranty: Twister covers the machine for ten years, with live technical support behind it.

Technical Specifications