Twister T4 Tumbler - Standard 1/4 in (wet)

What the Twister T4 Tumbler Does to a Cut

The tumbler is the cut. Everything else on a trimmer exists to move flower past it. This one carries 40 stainless slots at 1/4 in, on a smaller diameter than the T2 barrel. That is what reduces handling damage while it works.

Choosing a Replacement Tumbler for Wet or Dry

The 1/4 in standard tumbler is rated for both wet and dry flower, so one tumbler covers a whole harvest rather than two. The alternative is the 3/16 in narrow version, which takes a closer cut. It suits very dry or dense flower, where the standard slot leaves more leaf behind. Fit is exact. This is a T4 part and it will not go into a T2, which runs a different barrel. Because the tumbler is what actually cuts, it is also the part that wears. Swapping it on schedule is the difference between a machine that trims and one that bruises. It is stainless throughout, so it takes a washdown between runs without pitting.

Key Features

• 40 stainless slots at 1/4 in: The standard cut, and the part that actually does the trimming.
• Wet and dry, not wet only: The 1/4 in is rated for both, so one tumbler covers a harvest.
• Smaller diameter than a T2: Less handling as flower passes, which shows up as less bruising.
• T4 only: It does not fit a T2, which runs a different barrel entirely.
• 3/16 in is the alternative: A closer cut for very dry or dense flower, sold as a separate part.
• Stainless throughout: It takes a washdown between runs without pitting or staining.

Technical Specifications