Twister T6 Trimmer | Tabletop Wet and Dry, 19,250 Cuts Per Minute

What the Twister T6 Trimmer Does on a Bench

Throughput is the number people come for, and Twister rates this one at up to 5 lbs/hr dry or 18 lbs/hr wet. That comes from a rotary blade system turning over 19,250 cuts per minute against a bed knife. A 96 point adjustable blade means the clearance is set rather than accepted. The whole machine weighs 42 lbs and packs into about 1.2 cu ft, which is why it lives on a bench instead of a pallet. The tumbler is 4 in across in polished 304 stainless, and material only spends around 26 seconds inside it. Drive is a 0.25 HP motor through an enclosed belt. Blades are nitrided high carbon steel, hardened rather than coated, so there is no finish to chip into the harvest.

Running a Tabletop Bud Trimmer Wet or Dry

The same machine handles both states, and the tumbler is what changes. Wet material needs the open pattern so sticky flower does not bridge across the gaps. Dried flower down to around eight percent moisture wants the tighter one. Everything else stays where you set it. Feed at a steady rate rather than in handfuls, because a surge packs the tumbler and the cut goes uneven. Set the blade gap on a test batch first and leave it alone once the finish looks right. Cleaning is where a trimmer either fits your workflow or does not. This one comes apart with no tools and wipes down in well under ten minutes. Over a season that matters far more than any single throughput figure. Be realistic about scale though. At tabletop capacity this is a machine for small batches and home sized harvests, and a room producing continuously will outgrow it. Twister backs it with a three year warranty.

Key Features

• Up to 5 lbs/hr dry: Turns a day of hand trimming into an afternoon without leaving a machine finish.
• Up to 18 lbs/hr wet: Handles fresh flower straight off the plant with the wet tumbler fitted.
• 19,250 cuts per minute: Rotary blade against a bed knife, which is what gives the close cut.
• 96 point adjustable blade: Clearance is set by you rather than fixed, so the finish can be dialled in.
• Nitrided high carbon blades: Hardened rather than coated, so nothing flakes off into the harvest.
• 42 lbs and 1.2 cu ft: One person carries it, and it stores on a shelf rather than in a corner.
• Tool free teardown: Strips and wipes down in under ten minutes, which decides whether it gets used.
• Three year warranty: Covers the machine for long enough to see several seasons through.

Technical Specifications