Twister QC Conveyor | 60 in Belt, 0-15 ft/min, 115V for T2 T4

Where the Twister QC Conveyor Sits in a Trim Room

It goes on the outfeed. Flower leaves the trimmer and travels a 60 in belt at walking pace while the crew inspects, touches up or rejects it. Speed is adjustable from 0 to 15 ft/min, so the line runs at the rate your people work rather than the other way round. The belt is 12 in wide.

Setting Up a Greenhouse Conveyor Beside a T2 or T4

Height is the detail that decides whether it works. The legs adjust roughly 19 to 22 in, with 8 in extensions offered. That lets the belt meet the discharge of a T2 or T4 rather than sitting under it. Everything the flower touches is food grade. The bed, walls and casters are 304 stainless steel, and the belt is FDA approved urethane rather than plain rubber. Power is ordinary: 115V at 1.3A on a NEMA 5-15P plug, driven by a 1/30 HP, 25W motor on a 15A circuit. It handles wet or dry product. Ship weight is about 88 lbs and the crate runs 60 x 40 x 12 in. Warranty is a year on parts.

Key Features

• 60 in belt, 12 in wide: Enough run for a crew to inspect, touch up or reject before packing.
• 0 to 15 ft/min: Speed control sets the line to your people, not your people to the line.
• Legs adjust 19 to 22 in: 8 in extensions are offered, so the belt meets a T2 or T4 discharge height.
• 304 stainless steel: Bed, walls and casters. The belt itself is FDA approved urethane.
• 115V, 1.3A, 1/30 HP: A NEMA 5-15P plug on a 15A circuit. No three phase and no electrician.
• Wet or dry product: Ship weight is about 88 lbs, crated at 60 x 40 x 12 in.

Technical Specifications